Slab flattening mill with large capacity, powered cutter head directional controls with variable feed speed, cutter head with five carbide knives and orbital sanding head attachment.
The SlabMizer MB200 Slab Flattener efficiently surfaces and flattens wood slabs, boards, burls, cookies, and other wide material with minimal labor. Compared to a traditional router or planer, the SlabMizer flattens wider and thicker material in less time using powered cutter head directional controls with variable feed speed. For larger capacity, 1520 mm table extensions can be added to extend the material length.
Material is secured on the heavy duty, welded steel frame by 4 adjustable clamps. To adjust the cutting depth, a hand crank located on the top of the cutter head is adjusted from 0,40 mm to 3,17 mm in 0,40 mm increments. The cutter head is engaged and operated by a powered control console that can be used from any side of the machine or detached from the stand for handheld use.
Powered controls include on/off, variable feed speed, and a joystick direction control for the X and Y axis for finishing material with or against the grain. The cutter head can also be operated manually with a handle. Once both sides of the slab are surfaced, fine finishing is accomplished by using the 177 mm orbital sanding head attachment for the desired finish. Dust from the operation is easily removed with a 101.6 mm (4") diameter extraction port on top of the cutter head that can be connected to a dust extraction system.